ce vò pazienza Armageddon ... pazienza o un bazooka
promemoria
http://cobraf.com/forum/forum/scienza-energia-clima-286/topic/black-out-fusione-fredda-andrea-rossi-20889/?post=1116782#1116782
http://cobraf.com/forum/forum/scienza-energia-clima-286/topic/black-out-fusione-fredda-andrea-rossi-20889/?post=1116786#1116786
http://cobraf.com/forum/forum/scienza-energia-clima-286/topic/black-out-fusione-fredda-andrea-rossi-20889/?post=1116794#1116794
metto questo che della situazione ha la mia stessa identica opinione che già espressi a Camillo ... non stanno cercando i picchi, stanno cercando la stabilità SENZA accumulo ... dice 'at a large scale will appear constant' in un grande array probabilmente non c'è problema e l'accumulo non serve ma in mucchietto ... con l'AI si cerca di stabilizzare tutto, anche l'output
Rossi apprezza
:-)
i normodotati possono leggere ed esprimere le loro osservazioni, i cretini possono continuare a fare quello che vogliono che a me frega unca
KeithT
January 25, 2020 at 12:03 PM
Dear Andrea,
I think the possibility is high that the E-Cat SKL is going through a process of optimisation.
The current development is likely targeted to obtain then verify the best ratio of electricity to heat possible from the E-Cat SKL, to not just establish existing operational boundaries but to push boundaries as far as practicable in the time span available. What innovation can be applied to push the boundary, what works, what does not, it’s a team effort.
As the E-Cat SKL charge contains a plasma zone, there will always be some element of heat, so a cold SKL is not possible. There may be attempts to minimise the plasma operating temperature, and probably adjust the stimulation signal for energy production rate, but at some point there will be a structural lower phase transition, below this it will not start, the process inside the plasma at a large scale will appear constant but at a very small scale the timing of the energy production events may be random and in bursts, the control process requires active feedback, hence the advantage of an AI program trained to self-correct from deviations in output, even with AI, in attempting to reduce the heat output at some point a large deviation drop out will occur with shut down then automatic restart.
To target the optimal parameters that will produce the best electricity to heat ratio that can be tested as robust and reliant is a full research and development project, but in the case of the SKL may be limited to a period of weeks. It is likely that a good working version of the E-Cat SKL is ready, but can a better version be developed within the timespan before a third-party test then presentation.
An exciting time of discoveries but stressful to you and the people around you, this period may be regarded as the quiet before the storm, best wishes to you and your team.
Regards,
Keith Thomson.
